#ALLWINNER A64 VS H3 PC#
#ALLWINNER A64 VS H3 PLUS#

#ALLWINNER A64 VS H3 PLUS#

Boards with 4 USB ports + micro USB OTG will share the bandwidth through a USB hub controller, so performance may be impacted, and boards such as Orange Pi Plus 2E with 3 USB ports that do not use a USB hub controller should have better USB throughput.PCIe, or USB 3.0 interface, and performance is not different, and in some case lower, than simply connecting a USB hard drive to the board. SATA implementation are using a USB 2.0 to SATA bridge since Allwinner H3 does not come with either SATA.It will also be the only open source hardware board of the list. ThereвЂ™s no difference between boards with regards to the 40-pin Raspberry Pi connectors, and only H3-Olinuxino-NANO will have a different pinout, as well as more I/Os.With this mind, the first table takes care of the ultra-low cost boards that sell for less than $20, except the Olimex board which has not been released yet, and could cost a little more.ДҐV via micro USB port, or 4.7 ~ 5.6 V via VDD pinДЇollowed by a second table with boards with more memory, fast storage, Gigabit Ethernet, and so on. ItвЂ™s a quad core Cortex A7 processor clocked at up to 1.2 GHz (plus if overclocking but this may lead to overheating), with a Mali-400 MP2 GPU, and support for H.264 and H.265 videos up to 4K 30 Hz. But first letвЂ™s talk about Allwinner H3 SoC since itвЂ™s common to all boards.

#ALLWINNER A64 VS H3 PC#

Since a table with 10 boards would be hard to read, I made two tables: one with boards with 512 MB RAM + Orange Pi PC / PC Plus, and a second table with higher end boards with 1 to 2 GB RAM, and more features. Allwinner H3 SoC has now found its way into many low cost development boards, including several Orange Pi Boards, Banana Pi M2+, NanoPi M1, and Olimex H3-OlinuXino-NANO, and it might be difficult to choose among the list of boards available, so tkaiser has written a buyerвЂ™s guide for boards supported by Armbian, with some of the key differentiating factors, and on my side, I thought it might be a good idea to draw a comparison table between the boards.

Allwinner a64 vs h3